![Moss blanket slime rancher](https://loka.nahovitsyn.com/100.jpg)
Based on the selected material, the nozzle temperatures for material loading will be adjusted. Select a base material on the touch screen.This ensures that the correct temperature is used when loading the filament.įor all other materials, it is possible to create material profiles in Ultimaker Cura and load a material as a generic material. It scans all UFP files on the USB stick, if a material file within the UFP contains the UM2+Connect, the material can be installed to the printer. With firmware 1.3 and up, navigate to Set material, Add a new material and Import material from USB. Tip: Marketplace materials that are optimized for the UM2+Connect can be installed on the printer menu. The compatibility of a material profile with the Ultimaker 2+ Connect is visible on the Ultimaker Marketplace. Third-party material profiles are being developed for the Ultimaker 2+ Connect by our Material Alliance Partners and gradually added to the Ultimaker Marketplace. With launch, the Ultimaker 2+ Connect only contained print profiles for the Ultimaker build materials. We recommend applying a layer of glue optimized for the printing material.
![ultimaker cura 4.8 0 ultimaker cura 4.8 0](https://manufactur3dmag.com/wp-content/uploads/2020/05/Ultimaker-Cura-Visual-Intent-profile.jpg)
Do not level the build plate too tight to the nozzle to avoid extrusion and adhesion issues. Tip: It is important to carefully level the build plate before printing to ensure good adhesion. The material profiles are optimized for good print quality and reliable build plate adhesion and release. For detailed instructions per material, we recommend taking a look at the material pages. Printing profiles for the Ultimaker 2+ Connect can be found in Ultimaker Cura from version 4.8 and above. Depending on the material and nozzle combination, different qualities and layer heights are supported. When a configuration is not supported, reliable print quality could not be achieved. The overview below shows which material is compatible with which nozzle size. Material profiles are optimized in Ultimaker Cura for all 4 nozzle sizes and all 9 Ultimaker build materials. The Ultimaker 2+ Connect comes with a 0.4 mm nozzle 0.25, 0.6, and 0.8 mm nozzles can be purchased separately. Read more about third party material compatibility. Note: The Ultimaker 2+ Connect is compatible with a limited number of marketplace materials. PLA, Tough PLA, PETG, ABS, CPE, Nylon, CPE+, PC, TPU95A, and PP. This allows you to access the same information by right-clicking on the slicer parameter instead.The Ultimaker 2+ Connect is compatible with all 10 Ultimaker build materials: If the massive tool-tip pop-ups prove distracting, you can disable the pop-up feature from the plugin Preferences menu. Use this for a week and you just might become a slicer whiz. Instead of a short description, the plugin throws up a pop-up with a comprehensive write-up describing what the setting does, replete with detailed before/after images illustrating the change. Settings guide, however, combines the pop-up tips with the Ultimaker’s vast repository of slicer setting guides. Knowing when to tweak a particular slicer setting is critical to optimizing everything ranging from the very printability of a model to its print quality and the time it takes to complete it.Ĭura comes with pop-up tips for each parameter, which provide a brief description upon hovering on slicer parameters.
![ultimaker cura 4.8 0 ultimaker cura 4.8 0](https://stacks-production-us-east-1-upload.imgix.net/5923322b-3878-4f80-9687-e6444ab5f52b.png)
Cura gives you the choice of several dozen slicer parameters, and every single one of those can make or break your prints.
![Moss blanket slime rancher](https://loka.nahovitsyn.com/100.jpg)